top of page

Permanent Sticker Application Instructions

IMG_3515.heic

Our permanent stickers are perfect for hard surfaces like drinkware, phones, signs, etc. 

​

  1. Prep Your Surface: Clean the surface with a 50/50 mix of rubbing alcohol and water 

  2. Separate the Carrier Sheet from the White Backing: SLOWLY separate the clear carrier sheet from the white backing. If the sticker doesn’t stick to the clear carrier sheet, set it back down and apply pressure to the specific area that didn’t stick. 

  3. Place Your Sticker Onto Your Item: Lay the design down by starting from one side and ending at the other. Once you start placing your sticker onto an item, you cannot move it! Please be sure you are happy with the placement before you start adhering the sticker to your item. 

  4. Complete the Transfer Process: After placing, use a squeegee to run over the sticker with hard pressure, back and forth 3 - 5 times. You are now ready to SLOWLY peel the clear carrier sheet. If all elements do not transfer, lay the clear carrier sheet back down, squeegee hard again, and pull back the clear carrier sheet again. 

bottom of page